- 100mm suspension travel
- material: aluminium
- 29 wheelsize
- 148x12mm axle standard
- BB92 bottom bracket standard
- Air
- 120mm suspension travel
- Tapered
- remote lockout
- 51mm fork offset
- 2 piston
- 2 piston
- 180 mm
- 180 mm
- 30.9mm diameter
- 0mm setback
- S: 100mm travel seatpost - M/L/XL 125mm travel seatpost
- 32 teeth
- 170 mm-S, 175 mm-M up
- 10-51 teeth
- 12 speed
- 22.8mm inner width
- material: aluminium
- Tubeless ready (tubeless tape and valves not included)
- 29x2.35"
- fold
- TR EXO
- 29x2.35"
- fold
- TR EXO
- 110x15mm width front hub
- 32 spoke holes
- Centerlock
- 148x12mm width rear hub, 32 spoke holes
- Centerlock
- including removeable lever, 6/4mm allen key
weighed at frame size L and 29" wheels without pedals
Ramstorlek | S | M | L | XL |
Däckstorlekar | 29" | 29" | 29" | 29" |
ST - Seat Tube (mm) | 400 | 440 | 480 | 520 |
TT - Top Tube (mm) | 571 | 591 | 613 | 635.5 |
CS - Chain Stays (mm) | 435 | 435 | 435 | 435 |
HTA - Head Tube Angle (°) | 67.8 | 67.8 | 67.8 | 67.8 |
STA - Seat Tube Angle (°) | 76 | 76 | 76 | 76 |
BD - Bottom Bracket Drops (mm) | 44 | 44 | 44 | 44 |
HT - Head Tube Length (mm) | 95 | 95 | 105 | 115 |
FL - Fork Length (mm) | 531 | 531 | 531 | 531 |
R - Reach (mm) | 420 | 440 | 460 | 480 |
S - Stack (mm) | 604 | 604 | 613 | 622 |
WB - Wheel Base (mm) | 1137 | 1157 | 1181 | 1205 |
SH - Stand Over Height (mm) | 703 | 725 | 755 | 783 |
Siffra | Item Number | Namn | Info | Pieces | Torque NM |
1 | A2294000016 | WASHER | OD19mm ID15.1mm H3mm | 1 | |
2 | A2294000102 | WASHER | OD21mm ID17.1mm H3mm | 1 | |
3 | A2221000043 | BEARING | 3802V-2RD OD24mm ID15mm W7mm | 1 | |
4 | A2221000040 | BEARING | 172607V OD26mm ID17mm W7mm | 1 | |
5 | A2300000280 | SCREW | M10x1 L15mm | 1 | 16~18 |
6 | A2300000279 | BOLT | M10x1 OD15/17mm L68mm | 1 | |
7 | A2300000340 | SCREW | M6x1 L13.5mm | 1 | 10~12 |
8 | A2300000339 | BOLT | M6x1 OD10mm L55.5mm | 1 | |
9 | A2294000093 | WASHER | OD15mm ID10.1mm H3mm | 2 | |
12 | A2221000034 | BEARING | 6800V2RS OD19mm ID10mm W5mm | 2 | |
13 | A2300000281 | SCREW | M10x1 L15mm | 2 | |
14 | A2221000035 | BEARING | 6801V-2RS OD21mm ID12mm W5mm | 6 | |
15 | A2300000285 | SCREW | M8x1 L16.5mm | 1 | 12~14 |
16 | A2300000284 | BOLT | M8x1 OD12mm L68.5mm | 1 | |
17 | A2294000023 | WASHER | OD15mm ID12.1mm H3mm | 6 | |
18 | A2294000105 | WASHER | OD17mm ID12.1mm H2mm | 4 | |
19 | A2300000306 | SCREW | M8x1 L13.5mm | 4 | 12~14 |
20 | A2300000307 | BOLT | M8x1 OD12mm L16mm | 4 | |
21 | A2311000059 | RD-HANGER | DH-053 | 1 | |
22 | A2300000129 | SCREW | M3x0.5 L10mm | 2 | 2~4 |
23 | A2300000536 | SCREW | M4x0.7 L8mm | 1 | 2~4 |
24 | A2258000056 | CABLE PLUG | for RD/FD | 2 | |
25 | A2258000057 | CABLE GUIDE | for BB | 1 | |
26 | A2300000245 | SCREW | M4x0.7 L8mm | 1 | 3~5 |
27 | A2300000213 | SCREW | M3x0.5 L13.5mm | 2 | 2~4 |
28 | CABLE GUIDE | SMART ENTRY | |||
29 | CABLE GUIDE | SMART ENTRY |
Highlights
The ONE-TWENTY RC has a very low standover height, giving the rider ample space to manoeuvre when the terrain demands it. It slightly steeper seat and head angle (in comparison to the ONE-TWENTY) provides even more efficiency and a more marathon specific trail behaviour. The short travel rear
end, make the bike an even more uncompromising climber than its bigger brother.
Lightweight 6066 series aluminium triple butted and hydroformed frameset with ‘Smooth welding’ and internal cable routing. Tapered head tube for precise steering, Boost standard and rear through axle for rear end stiffness. The floating shock provides 100 mm of travel.
When hitting steam climbs in a marathon race, you want to be able to quickly lock out the front fork without taking your hands off the controls. So, all our ONE-TWENTY RC come with remote lockout, allowing you to lock out the fork from a leaver on your handlebars. The rear shock lockout is positioned on the shock to keep the cockpit clean and manageable.
The more marathon focused version offers 100 mm of rear wheel travel combined with a 120 mm suspension fork, resulting in a steeper seat and head angle, making the RC even more pedalling efficient and more agile on twisty courses.
Det nedre stötdämparfästet följer systemets rörelse, vilket ger mycket bekväm och effektiv trampning. Våra ingenjörer kan med hög precision påverka utväxlingsförhållandet och framdrivningen, vilket betyder att Float Link-systemet är mycket känsligt och att det ger bra stabilitet och dämpning. Känslan i våra Float Link-bakdelar är mer eller mindre att det finns obegränsad fjädring samtidigt som kontrollen vid klättring är perfekt.
Med en Dropper sadelstolpe kan du få sadeln ur vägen när du kommer in i branta backar och så att du får mer plats att röra dig över cykeln. Cykeln har Dropper sadelstolpe med integrerad kabel-/vajerdragning och reglage, vilket ger en snyggare look och enklare justering av sadelhöjd.
Den användes av MULTIVAN MERIDA BIKING TEAM under deras sista säsong 2016 och används fortfarande av mountainbikelegender som Gunn-Rita Dahle Flesjå och José Antonio Hermida, som vill ha blixtsnabb acceleration, bra klättringsegenskaper, utförskörningsegenskaper och låg vikt.