- material: aluminium
- 27,5x2,25" max. wheelsize
- 135x9mm axle standard
- internal
- max. 630 Wh
- Coil
- 80mm suspension travel
- 27,5x2,4" max wheelsize
- 2 piston
- 2 piston
- 180 mm
- 180 mm
- 30.9mm diameter
- 15mm setback
- 40mm seatpost suspension travel
- V-mount
- incl. MERIDA minitool
- 38 teeth
- Shimano FC-E8000
- 165 mm
- 11-46 teeth
- 10 speed
- 20mm inner width
- material: aluminium
- 27.5x2.25"
- wire
- reflecting line
- 27.5x2.25"
- wire
- reflecting line
- 100x9mm width front hub
- 32 spoke holes
- Centerlock
- 135x9mm width rear hub
- 36 spoke holes
- Centerlock
- 60Nm
- 630Wh
- 2A charging current
weighed with 27.5" wheels and at frame size S, without pedals
| Ramstorlek | XS | S | M | L | XL |
| Däckstorlekar | 27.5" | 27.5" | 27.5" | 27.5" | 27.5" |
| ST - Seat Tube (mm) | 380 | 430 | 480 | 530 | 580 |
| TT - Top Tube (mm) | 580 | 595 | 615 | 635 | 655 |
| CS - Chain Stays (mm) | 470 | 470 | 470 | 470 | 470 |
| HTA - Head Tube Angle (°) | 70 | 70 | 70 | 70 | 70 |
| STA - Seat Tube Angle (°) | 73.5 | 73.5 | 73.5 | 73.5 | 73.5 |
| BD - Bottom Bracket Drops (mm) | 65 | 65 | 65 | 65 | 65 |
| HT - Head Tube Length (mm) | 170 | 175 | 180 | 190 | 200 |
| FL - Fork Length (mm) | 476 | 476 | 476 | 476 | 476 |
| R - Reach (mm) | 385 | 399 | 417 | 435 | 452 |
| S - Stack (mm) | 656 | 661 | 666 | 675 | 685 |
| WB - Wheel Base (mm) | 1113 | 1129 | 1149 | 1170 | 1190 |
| SH - Stand Over Height (mm) | 403 | 403 | 402 | 402 | 401 |
| Siffra | Item Number | Namn | Info | Pieces | Torque NM |
| 1 | A2300000004 | SCREW | M3x0.5 L6mm | 2 | 2~4 |
| 2 | A2311000072 | RD-HANGER | DH-013F | 1 | |
| 3 | A2258000079 | CABLE PLUG | for rear brake | 1 | |
| 4 | A2300000468 | SCREW | M8x1.25 L18.5mm | 3 | 11~12 |
| 5 | A2300000469 | SCREW | M8x1.25 L23mm | 3 | 11~12 |
| 6.1 | A2143000126 | BUTTON | ON-OFF; for SHIMANO batteries | 1 | |
| 6.2 | A2143000097 | BLIND PLUG | for SIMPLO batteries | 1 | |
| 7 | A2164000088 | MOUNT | for lower battery mount | 1 | |
| 8 | A2298000143 | SCREW | M6x1.0 L10mm | 4 | 6~8 |
| 9 | A2030000016 | MOUNT | upper; for battery cover | 1 | |
| 10 | A2030000017 | MOUNT | lower; for battery cover | 1 | |
| 11 | A2160000012 | O-RING | OD6mm ID4mm | 2 | |
| 12 | A2221000048 | BUSHING | for battery cover | 2 | |
| 13 | A2300000530 | BOLT | M5x0.8 L39.5mm | 1 | 4~6 |
| 14 | A2300000231 | SCREW | M3x0.5 L8mm | 3 | 2~4 |
| 15 | A2143000153 | BLIND PLUG | for drive unit screw holes | 4 | |
| 16 | A2161000138 | COVER | for battery; frame size XS | 1 | |
| 16 | A2161000139 | COVER | for battery; frame size S | 1 | |
| 16 | A2161000140 | COVER | for battery; frame size M | 1 | |
| 16 | A2161000141 | COVER | for battery; frame size L | 1 | |
| 16 | A2161000142 | COVER | for battery; frame size XL | 1 | |
| 17 | A2136000071 | MOUNT | for battery cover | 1 | |
| 18 | A2029000001 | BUMPER | for battery cover | 2 | |
| 19 | A2134000061 | BUTTON | for cover lock | 1 | 3.75~4.25 |
| 20 | A2136000017 | MOUNT | for bottle cage | 1 | |
| 21 | A2292000028 | WASHER | OD9mm ID5.2mm H3mm | 2 | |
| 22 | A2298000154 | SCREW | M5x0.8 L12mm | 2 | 3~5 |
| 23 | A2298000158 | SCREW | M5x0.8 L25mm | 1 | 3~5 |
| 24 | A2164000065 | MOUNT | for SIMPLO ON-OFF | 1 | |
| 25 | A2300000568 | SCREW | M3x0.5 L6mm | 2 | 2~4 |
| 26 | A2300000204 | NUT | for fender; M6 | 1 | |
| 27 | A2300000288 | SCREW | M6x1.0 L18mm | 1 | 10~12 |
| 28 | A2363000255 | PROTECTOR | for step through area | 1 | |
| 29 | A2191000138 | HEAD SET | MERDIA/ACROS-ICR TREKKING | 1 | |
| 30 | A2161000143 | COVER | for drive unit; left side | 1 | |
| 31 | A2161000144 | COVER | for drive unit; right side | 1 | |
| 32 | A2143000122 | CABLE PLUG | for front light | 1 | |
| SMALL PARTS E6100 | see pdf file |
Highlights
Unique cradle like shaping of the downtube to accommodate the battery, without losing the all important frame stiffness of our low step-through frames. By not adding cutouts to the downtube, we can maintain the outstanding frame stiffness, that prevents our low step-through bikes from wobbling under load. Paired with an aluminium battery cover, the frames give the impression of an integrated battery, without sacrificing stability and battery accessibility. The tapered head tube, the large tube diameters and the forged motor bracket all contribute to achieving a safe and precise riding experience.
The eSPRESSO CC is available with the new 'Energy Cradle' frame, where the 745 or 630 Wh battery (depending on model) is housed on top of the downtube, and can be accessed via a removable aluminium battery cover, or as a semi-integrated frame, where the 504 Wh battery is integrated into the lower part of the downtube.
The eSPRESSO CC come fully equipped with fenders, kickstand, carrier and lights. Ready for any outing you can think of.
A centrally positioned low centre of gravity, which has been achieved through the positioning of the battery in the lower position of the downtube as well as the location of the Shimano motors, enables to deliver fantastic riding characteristics in any situation which are extremely important in particular in wave low step through frames which have the tendency to chatter and jitter when power is applied.
The decision to use 650B wheels with 2.25" off-road tread pattern for our CC models is not just a design feature but has more practical reasons. To add big volume tyres to an e-bike provides increased comfort but also extra traction and therefore more safety reserves. Small and even bigger bumps can easily be rolled over, and a big volume tyre provides more puncture protection compared to a narrow one.
Vajrar dras genom ramen för att ge snyggare look och för att hålla kablar/vajrar borta från luftflödet och skyddade mot fukt och smuts.
Den enastående ramstyvheten har stor inverkan på köregenskaperna för ramar med mycket lågt insteg. Koniskt styrrör, stor rördiameter, smitt motorfäste och genomgående bakaxel (142 x 12 mm) bidrar till säker och precis körupplevelse.
Technologies
