Every ounce of our eMTB know-how goes into the eONE-SIXTY 575 with award-winning handling paired to a sleek, all-aluminium frame that houses an extra high-capacity 750 Wh battery and powerful Shimano EP8 drive unit. Add in the confidence of long-travel RockShox suspension and the control of powerful Shimano brakes and refined drivetrain and no trail is out of reach.
The eONE-SIXTY has seamlessly followed in the footsteps of the 'original' eONE-SIXTY in becoming the most decorated, tested and awarded bike in MERIDA's history. This highly anticipated bike managed to collect a vast amount of amazing test results and wins, as well as a few more industry awards to its tally. E-Mountainbike gave it the 'BEST IN TEST' approval in their 'Best of 2021' eMTB group test, World of MTB also gave it their 'Best of 2021' award and FREERIDE gave the 9000 the almost perfect score of 9.5 out of ten, just to mention a few. For 2022, our all-aluminium e-enduro bike will be equipped with the proven EP8 motor from Shimano as well as with the range extending 630 Wh or 750 Wh (model specific) internal battery. A perfectly tuned MTB geometry, paired with a tough all-aluminium frame, seamlessly integrated battery and a 29er/27.5" wheel combo that delivers poise and confidence on the toughest trails, the eONE-SIXTY is ready for anything you can throw at it.
- Tough all-aluminium chassis with integrated 750 Wh battery
- Powerful Shimano EP8 drive unit
- Mixed wheel size setup with 160/150 mm travel split
- High-quality Shimano brakes and wide-range drivetrain
- RockShox suspension front and rear
- Multiple award and test winning frame geometry
- 29mm inner width
- material: aluminium
- Tubeless ready (tubeless tape and valves not included)
- material: aluminium
- 150mm suspension travel
- 27.5x2.8" max. wheelsize
- 148x12mm axle standard
- intube
- Air
- 160mm suspension travel
- Tapered
- 51mm fork offset
- 29x2.8" max wheelsize
- platform
- 4 piston
- 203 mm
- 203 mm
- 4 piston
- 4 piston
- 110x15mm width front hub
- 32 spoke holes
- Centerlock
- 148x12mm width rear hub
- 36 spoke holes
- Centerlock
- 34 teeth
- 165 mm
- 29x2.4"
- wire
- 27.5x2.6"
- wire
- 110x15mm width front hub
- 32 spoke holes
- Centerlock
- 148x12mm width rear hub
- 36 spoke holes
- Centerlock
- V-mount
| Velikost okvirja | S | M | L | XL |
| Tire Sizes | 29/27.5" | 29/27.5" | 29/27.5" | 29/27.5" |
| St Seat Tubes Mm | 415 | 430 | 450 | 470 |
| Tt Top Tubes Mm | 584 | 605 | 626 | 647 |
| Cs Chain Stays Mm | 439.5 | 439.5 | 439.5 | 439.5 |
| Hta Head Tube Angles Deg | 65.5 | 65.5 | 65.5 | 65.5 |
| Sta Seat Tube Angle Deg | 75.5 | 75.5 | 75.5 | 75.5 |
| Bd Bottom Bracket Drops Mm | 17.5 | 17.5 | 17.5 | 17.5 |
| Ht Head Tube Lengths Mm | 115 | 120 | 125 | 130 |
| Fl Fork Lengths Mm | 571 | 571 | 571 | 571 |
| R Reachs Mm | 420 | 440 | 460 | 480 |
| S Stacks Mm | 633 | 638 | 642 | 647 |
| Wb Wheel Base Mm | 1190 | 1212 | 1234 | 1256 |
| Sh Stand Over Height Mm | 736 | 733 | 739 | 753 |
| Number | Item Number | Name | Info | Pieces | Torque NM |
| 1 | A2294000016 | WASHER | OD19mm ID15.1mm H3mm | 2 | |
| 2 | A2221000043 | BEARING | 3802V-2RS OD24mm ID15mm W7mm | 2 | |
| 3 | A2300000263 | BOLT | M10x1 OD15mm L64mm | 1 | |
| 4 | A2300000264 | SCREW | M10x1 L20mm | 1 | 16~18 |
| 5 | A2300000364 | SCREW | M6x1 L13.5mm | 1 | 10~12 |
| 6 | A2300000356 | BOLT | M6x1 OD10mm L51.5mm | 1 | |
| 7 | A2035000014 | LINK | 1 | ||
| 8 | A2221000034 | BEARING | 6800V-2RS OD19mm ID10mm W5mm | 2 | |
| 9 | A2300000235 | CREW | M10x1 L15mm | 2 | 14~16 |
| 10 | A2294000093 | WASHER | OD15mm ID10.1mm H3mm | 2 | |
| 11 | A2221000035 | BEARING | 6801V-2RS OD21mm ID12mm W5mm | 2 | |
| 12 | A2300000266 | SCREW | M8x0.75 L16mm | 1 | 12~14 |
| 13 | A2300000265 | BOLT | M8x0.75 OD12mm L68mm | 1 | |
| 14 | A2294000023 | WASHER | OD15mm ID12mm H3mm | 2 | |
| 15 | A2294000099 | WASHER | OD17.5mm ID12.1mm H2mm | 4 | |
| 16 | A2221000039 | BEARING | 12214V-2RS OD21mm ID12mm W4mm | 8 | |
| 17 | A2300000433 | BOLT | M8x0.75 OD12mm | 4 | |
| 18 | A2300000434 | SCREW | M8x0.75 L14mm | 4 | 12~14 |
| 20 | A2311000067 | RD-HANGER | DH-057 | 1 | |
| 21 | A2300000185 | SCREW | M3x0.5 L20.5mm | 2 | 2~4 |
| SMALL PARTS | see pdf file |
Tehnologija
