Should you prefer the slightly more minimalist approach of a double chainring setup over a triple while still looking for a broad gear range, then the BIG.NINE 60 (2x) might be the right one for you. It combines a double butted aluminium frame with a more comfort-focused geometry providing you with the perfect hardtail for long off-road outings and fast blasts through the urban jungle. A 100 mm suspension fork from RockShox and hydraulic disc brakes improve comfort and control even further.
Mountain biking is one of the most varied cycling disciplines and probably the most demanding when it comes to equipment. While full suspension bikes offer amazing riding characteristics, the classic hardtail remains one of the purest tools for the job. Our 29er wheel equipped BIG.NINE range comes in carbon and aluminium and features multiple geometry options. The carbon and LITE framed BIG.NINE, with its racing geometry, is an ideal companion on XC and marathon race tracks whilst the more relaxed geometry of the BIG.NINE TFS and SPEED offers a more comfortable, upright riding position. Our classic hardtails are the backbone of our range and showcase the enormous wealth of experience and knowledge we could gain in almost half a century of bike production and manufacturing. The BIG.NINE range symbolises the symbiosis between modern frame technology, attention to detail and craftsmanship 'Made in Taiwan'.
- Double butted aluminiumram med 29" hjul
- Mindre aggressiv och mer upprätt sittställning för optimal kontroll och komfort
- Rock Shox Judy dämpare med 100 mm slaglängd och lockout
- Shimano 9-delat drivverk med 2 drev fram
- Hydrauliska skivbromsar
- Integrerad kabeldragning
- material: aluminum
- 29x2.25" max. wheelsize
- 135x9mm axle standard
- BSA bottom bracket standard
- Coil
- 100mm suspension travel
- Lockout
- 46mm fork offset
- 29x2.25" max. wheelsize
- 2 piston
- hydraulic disc brake
- 2 piston
- hydraulic disc brake
- 160 mm
- 160 mm
- material: aluminium
- 30.9mm diameter
- 15mm setback
- 36-22 teeth
- 170 mm-S, 175 mm-M/XXL
- 11-32 teeth
- 9 speed
- 17mm inner width
- material: aluminium
- 29x2.2"
- wire
- 29x2.2"
- wire
- 100x9mm width front hub
- 32 spoke holes
- Centerlock
- 135x9mm width rear hub
- 32 spoke holes
- Centerlock
Ramstorlek | S | M | L | XL | XXL |
Däckstorlekar | 29" | 29" | 29" | 29" | 29" |
ST - Seat Tube (mm) | 370 | 430 | 470 | 510 | 560 |
TT - Top Tube (mm) | 570 | 590 | 610 | 630 | 650 |
CS - Chain Stays (mm) | 440 | 440 | 440 | 440 | 440 |
HTA - Head Tube Angle (°) | 70 | 70 | 70 | 70 | 70 |
STA - Seat Tube Angle (°) | 73 | 73 | 73 | 73 | 73 |
BD - Bottom Bracket Drops (mm) | 60 | 60 | 60 | 60 | 60 |
HT - Head Tube Length (mm) | 100 | 115 | 130 | 145 | 160 |
FL - Fork Length (mm) | 506 | 506 | 506 | 506 | 506 |
R - Reach (mm) | 382 | 398 | 414 | 429 | 445 |
S - Stack (mm) | 614 | 628 | 642 | 656 | 670 |
WB - Wheel Base (mm) | 1069 | 1090 | 1110 | 1131 | 1152 |
SH - Stand Over Height (mm) | 679 | 727 | 763 | 800 | 843 |