The ONE-FORTY 400 brings an unheard of level of climbing and descending performance into a high-value package built around our all-new aluminium frame. It's got exactly the same ground-breaking geometry as its more expensive brethren, just paired with kit that delivers the performance you need, without the price tag. Dropper posts on all models, a wide-range 11-speed Shimano drivetrain and no-nonsense suspension from Marzocchi and RockShox get the job done without fuss.
The new ONE-FORTY is the ultimate trail bike, made for the toughest trails in the world. It’s the pinnacle of modern trail riding, with a super-steep 80° seat angle, low front end and bottom bracket allow it to clear the most technical climbs, while longer reach figures across all sizes and a well-balanced 65° head angle mean it’s still more than capable of ripping any descent. With our new sizing system, riders can run a longer or shorter reach frame independently of their height, with suspension that becomes more progressive as you size up to better cope with heavier/harder riders. We’ve focussed on weight reduction and rolling speed too, for improved efficiency. All bikes come with long travel dropper posts, WIRE PORT cable routing and a reliable threaded bottom bracket plus carbon frames have on-board tool storage and FidLock magnetic bottle cages.
- Full aluminium frame with FAST kinematic suspension and AGILOMETER sizing
- Radical new trail geometry with full 29er wheels
- Marzocchi and RockShox suspension, 150 mm front, 143 mm rear
- Wide-range Shimano 11-speed drivetrain
- 200 mm dropper post on XL/L/M, 150 mm on S, 125 mm on XS
- Powerful 4-piston hydraulic disc brakes
- 29mm inner width
- material: aluminium
- Tubeless ready (tubeless tape and valves not included)
- 143mm suspension travel 29"
- material: aluminium
- 29x2.5" max. wheelsize
- 148x12mm axle standard
- BSA bottom bracket standard
- Air
- 140mm suspension travel
- Tapered
- 51mm fork offset
- 29x2.4" max wheelsize
- 4 piston
- 203 mm
- 4 piston
- 4 piston
- 110x15mm width front hub
- 32 spoke holes
- Centerlock
- 148x12mm width rear hub
- 32 spoke holes
- Centerlock
- 32 teeth
- 170 mm-S, 175 mm-M up
- 29x2.4"
- wire
- 29x2.4"
- wire
weighed at frame size MID
- 110x15mm width front hub
- 32 spoke holes
- Centerlock
- 148x12mm width rear hub
- 32 spoke holes
- Centerlock
- V-mount
Velikost okvirja | XShort | Short | Mid | Long | XLong |
Tire Sizes | 29" | 29" | 29" | 29" | 29" |
St Seat Tubes Mm | 400 | 410 | 425 | 445 | 470 |
Tt Top Tubes Mm | 532 | 559 | 586 | 618 | 649 |
Cs Chain Stays Mm | 437.5 | 437.5 | 437.5 | 437.5 | 437.5 |
Hta Head Tube Angles Deg | 65 | 65 | 65 | 65 | 65 |
Sta Seat Tube Angle Deg | 80 | 80 | 80 | 80 | 80 |
Bd Bottom Bracket Drops Mm | 35 | 35 | 35 | 35 | 35 |
Ht Head Tube Lengths Mm | 95 | 95 | 95 | 105 | 120 |
Fl Fork Lengths Mm | 557 | 557 | 557 | 557 | 557 |
R Reachs Mm | 426 | 453 | 480 | 509 | 535 |
S Stacks Mm | 607 | 607 | 607 | 616 | 629 |
Wb Wheel Base Mm | 1177 | 1204 | 1232 | 1265 | 1298 |
Sh Stand Over Height Mm | 730 | 735 | 738 | 735 | 730 |
Number | Item Number | Name | Info | Pieces | Torque NM |
1 | A2300000625 | BOLT | M6x1 OD10mm L39mm | 1 | |
2 | A2294000196 | WASHER | for M6 sunkenhead screw OD16mm | 1 | |
3 | A2298000113 | SCREW | M6x1 L16mm | 2 | 8~10 |
4 | A2300000608 | SCREW | M8x1 | 1 | 11~12 |
5 | A2292000102 | WASHER | OD19mm ID15mm H0,3mm | 1 | |
6 | A2036000032 | MOUNT | for shock without bushing | 1 | |
7 | A2294000102 | WASHER | OD21mm ID17.1mm H3mm | 5 | |
8 | A2221000058 | BEARING | 6803V-2RS OD26mm ID17mm W5mm | 4 | |
9 | A2294000182 | LOCK RING | for bearing | 2 | |
10 | A2300000684 | SCREW | M15x1 L16mm | 2 | 23~25 |
11 | A2294000105 | WASHER | OD17mm ID12.1mm H2mm | 1 | |
12 | A2294000205 | WASHER | OD15.5mm ID10.1mm H2mm | 1 | |
13 | A2221000035 | BEARING | 6801V-2RS OD21mm ID12mm W5mm | 1 | |
14 | A2221000034 | BEARING | 6800V-2RS OD19mm ID10mm W5mm | 1 | |
15 | A2294000197 | WASHER | for M6 sunkenhead screw OD18.5mm | 1 | |
16 | A2300000475 | BOLT | M6x1 OD10/12mm L55mm | 1 | 8~10 |
17 | A2300000683 | SCREW | M15x1 L18.5mm | 2 | 23~25 |
18 | A2302000082 | NUT | M15x1 flipchip | 2 | |
19 | A2031000093 | LINK | 1 | ||
20 | A2258000239 | CABLE GUIDE | 1 | ||
21 | A2300000151 | SCREW | M4x0.7 L12mm | 1 | 3~5 |
22 | A2294000016 | WASHER | OD19mm ID15.1mm H3mm | 1 | |
23 | A2300000598 | BOLT | M6x1 OD15/17mm L55mm | 1 | 8~10 |
24 | A2221000040 | BEARING | 172607V-2RS OD26mm ID17mm W7mm | 1 | |
25 | A2221000043 | BEARING | 3802V-2RS OD24mm ID15mm W7mm | 1 | |
26 | A2300000609 | SCREW | M10x1 L15mm | 1 | 15~17 |
27 | A2311000102 | RD-HANGER | UDH | 1 | |
1 | A21610000211 | CABLE GUIDE | for headtube | 1 | |
2 | A2161000227 | MOUNT | for tube/accesoires | 1 | |
3 | A2298000004 | SCREW | M5x0.8 L15mm | 4 | 8~10 |
4 | A2161000079 | COVER | for service opening | 1 | |
5 | A2300000231 | SCREW | M3x0.5 L8mm | 1 | |
6 | A2164000062 | MOUNT | ISCG-05 | 1 | |
7 | A2298000107 | SCREW | M6x1 L12mm | 1 | 6~8 |
8 | A2292000008 | WASHER | OD10mm ID6.2mm H3mm | 2 | |
9 | A2232000042 | MOUNT | Mount for chain guide | 1 | |
10 | A2232000028 | CHAIN GUIDE | for 28T-36T | 1 | |
11 | A2300000484 | SCREW | M4x0.7 L10mm | 1 | 1,5~2 |
12 | A2292000106 | WASHER | OD10mm ID6.2mm H0.5mm | 2 | |
13 | A2298000224 | SCREW | M6x1 L16mm | 2 | 6~8 |
14 | A2116000239 | PROTECTOR | 1 | ||
15 | A2300000318 | SCREW | M4x0.7 L12mm | 3 | 3~5 |
16 | A2136000076 | MOUNT | PM200 | 1 | |
17 | A2298000409 | SCREW | M6x1 L12mm | 3 | 11~12 |
18 | A2158000078 | PROTECTOR | for chain stay | 1 | |
19 | A2258000117 | CABLE PLUG | for brake | 1 | |
20 | A2191000231 | HEAD SET | Acros AIX-586 | 1 | |
21 | A2358000131 | PROTECTOR | for down tube | 1 | |
22 | A2358000132 | PROTECTOR | for down tube | 1 | |
23 | A2362000121 | PROTECTOR | for seat stay | 1 | |
24 | A2002000135 | THRU AXLE | EXPERT TR; L=178.5mm M12x1 TL=13.5mm | 1 | |
25 | A2029000034 | TUBE | foam; ID5mm L600mm | 2 | |
26 | A2029000042 | TUBE | foam; ID6mm L600mm | 1 | |
27 | A2311000102 | RD-HANGER | UDH | 1 |