- material: aluminium
- 700x35C max. wheelsize
- 100x9/135x9mm axle standard
- BSA bottom bracket standard
- Tapered
- material: carbon
- 700x35C max. wheelsize
- BR-MT200 brake caliper
- 160 mm
- material: aluminium
- 30.9mm diameter
- 12mm setback
- V-mount
- 48-38-28 teeth
- 170 mm-all sizes
- 11-32 teeth
- 8 speed
- 17mm inner width
- 22mm height
- material: aluminium
- 100x9mm width front hub
- 28 spoke holes
- centerlock
- 135x9mm width rear hub
- 28 spoke holes
- centerlock
- 700x32C
- wire
| Misura telaio | XXS | XS | S | S/M | M/L | L | XL |
| Misura pneumatici | 28" | 28" | 28" | 28" | 28" | 28" | 28" |
| St reggisella mm. | 440 | 470 | 500 | 520 | 540 | 560 | 590 |
| Tt top tube mm. | 545 | 555 | 561 | 571 | 583 | 597 | 610 |
| CS Carro posteriore Mm | 438 | 438 | 438 | 438 | 438 | 438 | 438 |
| Hta Gradi angolo sterzo | 70 | 70 | 70.5 | 71 | 71.5 | 72 | 72 |
| Sta Gradi angolo tubo piantone | 73.5 | 73.5 | 73.5 | 73.5 | 73.5 | 73.5 | 73.5 |
| Bd Movimento centrale mm. | 65 | 65 | 65 | 65 | 65 | 65 | 65 |
| Ht Altezza tubo sterzo mm. | 140 | 150 | 160 | 170 | 190 | 215 | 240 |
| FI Lunghezza forcella mm. | 395 | 395 | 395 | 395 | 395 | 395 | 395 |
| R Reachs Mm | 381 | 389 | 392 | 398 | 404 | 410 | 416 |
| S Stacks Mm | 552 | 562 | 573 | 585 | 606 | 631 | 655 |
| Wb interasse mm | 1040 | 1051 | 1053 | 1057 | 1065 | 1074 | 1088 |
| Sh Stand Over Height Mm | 719 | 744 | 769 | 787 | 806 | 828 | 855 |
| Numero | Codice articolo | Nome | Info | Pezzi | Coppia NM |
| 1 | A2258000056 | CABLE PLUG | for rear brake | 2 | |
| 2 | A2258000324 | SCREW | M5x0.8 L10mm | 1 | 3~5 |
| 3 | A2240000010 | CABLE GUIDE | for FD | 1 | |
| 4 | A2298000093 | SCREW | M4x0.7 L6mm | 1 | 2~4 |
| 5 | A2298000028 | SCREW | M5x0.8 L12mm | 1 | 3~5 |
| 6 | A2311000011 | RD-HANGER | 8317-0000P for ROAD-RD | 1 | |
| 7 | A2300000088 | SCREW | M4x0.7 L9mm | 1 | 2~4 |
Punti salienti della categoria
Since its redesign for the 2020 season, the SPEEDER has become more sporty. By increasing the length of the top tube, we have achieved a slightly longer reach, which offers the rider a more sportive riding position while still being on the comfortable side. Furthermore, this geometry change leads to a longer wheelbase, which has a positive effect on directional stability and in combination with the slightly slacker head tube angle, improves the riding stability at speed.
All models feature powerful and easy to modulate hydraulic disc brakes. Hydraulic disc brakes offer great stopping power in any weather, are more or less maintenance-free and are not affected by rough or kinked cables.
The new SPEEDER has the ability to take up to 37 mm wide tyres, increasing the ride comfort as well as the grip (and therefore safety). Wider tyres also offer improved puncture protection. Even with fenders being fitted, the SPEEDER can still take up to 32 mm wide tyres.
We use 6066 series aluminium, the highest level generally used in bike production. Its metallic composition allows it to be extensively hydroformed (a process of forcing a hot emulsion of water and oil through tubes in a negative mould). This allows us to vary wall thicknesses and tune the frame to be both strong where it is needed and flexible where required.
We feature internal cable routing on all models. Cables are routed through the frame, entering and exiting through smooth sockets. Only a clever system for our internal guiding and fixing guarantees reliable and rattle free routing, whilst the cables are protected from moisture and dirt and gives the bike a cleaner look.
All models are equipped with a full carbon tapered fork. Carbon has great vibration absorbing properties in addition to being lightweight, so ride quality is improved. The carbon tapered steerer provides great stiffness to the front end of the bike, delivering precise and confidence-inspiring handling.
Tecnologie
