Every ounce of our eMTB know-how goes into the eONE-SIXTY 500, with award-winning handling paired to a sleek, all-aluminium frame that houses a high-capacity 630 Wh battery and powerful Shimano EP8 drive unit. Add in the confidence of long-travel RockShox suspension and the control of powerful Shimano brakes and refined drivetrain and no trail is out of reach.
The eONE-SIXTY has seamlessly followed in the footsteps of the 'original' eONE-SIXTY in becoming the most decorated, tested and awarded bike in MERIDA's history. This highly anticipated bike managed to collect a vast amount of amazing test results and wins, as well as a few more industry awards to its tally. E-Mountainbike gave it the 'BEST IN TEST' approval in their 'Best of 2021' eMTB group test, World of MTB also gave it their 'Best of 2021' award and FREERIDE gave the 9000 the almost perfect score of 9.5 out of ten, just to mention a few. For 2022, our all-aluminium e-enduro bike will be equipped with the proven EP8 motor from Shimano as well as with the range extending 630 Wh or 750 Wh (model specific) internal battery. A perfectly tuned MTB geometry, paired with a tough all-aluminium frame, seamlessly integrated battery and a 29er/27.5" wheel combo that delivers poise and confidence on the toughest trails, the eONE-SIXTY is ready for anything you can throw at it.
- Tough all-aluminium chassis with integrated 630 Wh battery
- Powerful Shimano EP8 drive unit
- Mixed wheel size setup with 160/150 mm travel split
- High-quality Shimano brakes and wide-range drivetrain
- RockShox suspension front and rear
- Multiple award and test winning frame geometry
- material: aluminium
- 150mm suspension travel
- 27.5x2.8" max. wheelsize
- 148x12mm axle standard
- intube
- max. 630 Wh
- Air
- 160mm suspension travel
- Tapered
- 51mm fork offset
- 29x2.8" max wheelsize
- 4 piston
- 165 mm for all sizes
- 30.9mm diameter
- 0mm setback
- XS 100mm travel seatpost - S/M 125mm travel seatpost - L/XL 150mm travel seatpost
- V-mount
- 34 teeth
- Shimano FCEM600
- 11-51 teeth
- 11 speed
- 29mm inner width
- material: aluminium
- Tubeless ready (tubeless tape and valves not included)
- 110x15mm width front hub
- 32 spoke holes
- Centerlock
- 148x12mm width rear hub
- 36 spoke holes
- Centerlock
- including removeable lever, 6/4mm allen key
- 29x2.4"
- wire
- 27.5x2.6"
- wire
- 85Nm
| Misura telaio | XS | S | M | L | XL |
| Misura pneumatici | 29/27.5" | 29/27.5" | 29/27.5" | 29/27.5" | 29/27.5" |
| St reggisella mm. | 405 | 415 | 430 | 450 | 470 |
| Tt top tube mm. | 563 | 584 | 605 | 626 | 647 |
| CS Carro posteriore Mm | 439.5 | 439.5 | 439.5 | 439.5 | 439.5 |
| Hta Gradi angolo sterzo | 65.5 | 65.5 | 65.5 | 65.5 | 65.5 |
| Sta Gradi angolo tubo piantone | 75.5 | 75.5 | 75.5 | 75.5 | 75.5 |
| Bd Movimento centrale mm. | 17.5 | 17.5 | 17.5 | 17.5 | 17.5 |
| Ht Altezza tubo sterzo mm. | 110 | 115 | 120 | 125 | 130 |
| FI Lunghezza forcella mm. | 571 | 571 | 571 | 571 | 571 |
| R Reachs Mm | 400 | 420 | 440 | 460 | 480 |
| S Stacks Mm | 633 | 633 | 638 | 642 | 647 |
| Wb interasse mm | 1170 | 1190 | 1212 | 1234 | 1256 |
| Sh Stand Over Height Mm | 737 | 736 | 733 | 739 | 753 |
| Numero | Codice articolo | Nome | Info | Pezzi | Coppia NM |
| 1 | A2294000016 | WASHER | OD19mm ID15.1mm H3mm | 2 | |
| 2 | A2221000043 | BEARING | 3802V-2RS OD24mm ID15mm W7mm | 2 | |
| 3 | A2300000263 | BOLT | M10x1 OD15mm L64mm | 1 | |
| 4 | A2300000264 | SCREW | M10x1 L20mm | 1 | 16~18 |
| 5 | A2300000364 | SCREW | M6x1 L13.5mm | 1 | 10~12 |
| 6 | A2300000356 | BOLT | M6x1 OD10mm L51.5mm | 1 | |
| 7 | A2035000014 | LINK | 1 | ||
| 8 | A2221000034 | BEARING | 6800V-2RS OD19mm ID10mm W5mm | 2 | |
| 9 | A2300000235 | CREW | M10x1 L15mm | 2 | 14~16 |
| 10 | A2294000093 | WASHER | OD15mm ID10.1mm H3mm | 2 | |
| 11 | A2221000035 | BEARING | 6801V-2RS OD21mm ID12mm W5mm | 2 | |
| 12 | A2300000266 | SCREW | M8x0.75 L16mm | 1 | 12~14 |
| 13 | A2300000265 | BOLT | M8x0.75 OD12mm L68mm | 1 | |
| 14 | A2294000023 | WASHER | OD15mm ID12mm H3mm | 2 | |
| 15 | A2294000099 | WASHER | OD17.5mm ID12.1mm H2mm | 4 | |
| 16 | A2221000039 | BEARING | 12214V-2RS OD21mm ID12mm W4mm | 8 | |
| 17 | A2300000433 | BOLT | M8x0.75 OD12mm | 4 | |
| 18 | A2300000434 | SCREW | M8x0.75 L14mm | 4 | 12~14 |
| 20 | A2311000067 | RD-HANGER | DH-057 | 1 | |
| 21 | A2300000185 | SCREW | M3x0.5 L20.5mm | 2 | 2~4 |
| SMALL PARTS | see pdf file |
Punti salienti della categoria
Comes equipped with the new EP8 motor from Shimano STePS. It offers an increased performance of 85 Nm, less weight, a further reduction in size and less friction. On top of that, the new internal battery offers an extended range and super-fast charging capabilities.
First introduced in 2015, the e-bike version of the 'Internal Block' is incorporated directly into the frame and prevents the fork crown from hitting the frame in case of a crash or an extreme steering angle. As an extra protection, there are additional rubber bumpers on the frame to avoid any frame damage from the fork crown.
L'eONE-SIXTY è dotato di un interruttore on/off satellitare perfettamente posizionato, all'estremità del tubo sterzo del tubo orizzontale, e di una porta di ricarica satellitare ben protetta, posizionata nel triangolo del telaio principale, appena sopra il motore.
To give the e-full suspension bikes precise steering, fantastic ‘rolling over obstacles’ behaviour yet maximum traction, we have combined a 29er front wheel with a 2.5" tyre and a 650B rear wheel, equipped with a slightly wider 2.6" tyre. The perfect combination of precision, playfulness and traction.
Due to the integrated battery, we were able to offer water bottle cage fixing points, allowing bottles or accessories like a lock or pump to the frame to be fitted into the main frame triangle. Great if you want to keep your back free of hydration packs and backpacks.
These models are available in two different frame options. A carbon front end combined with a 6061 aluminium rear end, or a more budget-friendly all-aluminium chassis.
Tecnologie
